LoadSteward

Fuel cost

How to improve fuel economy in a truck: what each step saves, with sources

Updated October 2026 · By

Quick answer

To improve fuel economy in a truck, start with what costs nothing: slow down (about 0.1 mpg per mph, and 7% less fuel for 5 mph slower, per EPA SmartWay), cut idling (about 0.8 gallons an hour, DOE), and keep tires inflated. Then spend on trailer aero and low rolling resistance tires: a SmartWay trailer saves 6% or more.

Stack the steps on your own truck

Pick what you would do. The receipt stacks each sourced saving on your miles, mpg and idle hours, at this week's diesel price:

mi
mpg
hr
PICK YOUR FUEL SAVERS
%
Fuel saved · one year
Driving fuel now16,923 gal
Idle fuel now (0.8 gal/hr)1,440 gal
Drive 5 mph slower on the highway−7%
Gallons saved1,185
At $6.28 diesel$7,435
Driving mpg after6.99

Savings stack on the fuel left after each one, not on the original. Percentages are the sourced figures listed with each item; your truck will differ. Diesel: EIA weekly U.S. average.

How to improve fuel economy in a semi truck, step by step

1. Slow down

Air drag rises steeply with speed, and a tractor-trailer is a large flat shape. EPA's SmartWay program uses a rule of thumb of about 0.1 mpg lost for every 1 mph above highway cruise, and says cutting highway speed by 5 mph can reduce fuel use by about 7%. Its example: a long-haul truck going from 65 to 60 mph saves over 1,200 gallons a year. It works on the next load and costs only a little time, which good trip planning gets back.

Source: EPA SmartWay, A Glance at Clean Freight Strategies: Reducing Highway Speed (EPA-420-F-16-029) · checked Oct 2026

2. Cut idle hours

An idling truck burns about 0.8 gallons an hour and moves zero miles. The DOE puts typical long-haul rest-period idling at about 1,800 hours a year. An APU, battery HVAC, a bunk heater or simply an idle shutdown timer replaces most of it. The costs, laws and payback are in our truck idling guide.

Source: U.S. DOE, Vehicle Technologies Office, Long-Haul Truck Idling Burns Up Profits (fact sheet, Argonne estimates) · checked Oct 2026

3. Keep tires at the right pressure, and pick efficient ones

Underinflated tires flex more, wear faster and raise rolling resistance on every mile. Check pressures cold, weekly, against the tire maker's load and inflation table. When replacing, look for EPA SmartWay-verified low rolling resistance tires; on a SmartWay-designated trailer, verified tires count for 1% or more of the savings.

4. Close the gaps: aerodynamics

On the tractor: roof fairing set to the trailer height, side extenders that close the gap to the trailer, chassis skirts. On the trailer: side skirts, a boat tail, a nose cone or gap fairing. EPA verifies trailer devices in tiers of 1%, 4%, 5% and 9% or more, and a SmartWay-designated trailer reaches 6% or more (Elite 10% or more). Aero pays on highway miles, not in city work.

Source: EPA SmartWay, Overview of 2015 updates to the EPA-designated SmartWay trailer (EPA-420-F-15-009) · checked Oct 2026

5. Shift and cruise for low rpm

Most modern engines make their best fuel economy at low rpm under load. Use cruise control and predictive cruise on open highway, let the automated transmission upshift early, and avoid hard acceleration and late braking. Progressive shifting on a manual does the same.

6. Maintain what wastes fuel quietly

Dragging brakes, a misaligned axle, a clogged air filter, a leaking charge air cooler or a failing injector all cost fuel without a warning light. Alignment and brake checks at every PM pay for themselves.

7. Cut weight you don't need

Extra fuel in the tanks on a short run, unused chains and gear, a heavier spec than the freight needs. Every pound you don't haul is fuel you don't burn, and freight you could haul instead.

8. Cut empty miles and plan fuel stops

The mile that costs least is the one you don't drive empty. Plan reloads near deliveries, take routes with fewer climbs where the miles are close, and buy fuel where the price and tax are lower; IFTA tax by state shows each state's rate.

What to do first: free, cheap, then capital

Not every step costs the same, so order them by what they cost and how fast they pay:

StepCostWhen it pays
Lower cruise speed, smoother drivingNothingThe next load
Idle shutdown timer, fewer idle hoursNothing to a few hundred dollarsThe first month
Weekly tire pressure checksA gauge and ten minutesEvery mile
Alignment, brake and air filter checksPart of a PMEvery mile after
Tractor aero adjustments (fairing height, extenders)LowHighway miles
Low rolling resistance tiresAt replacement timeOver the tire's life
Trailer skirts and tailsCapitalDepends on highway miles and who owns the trailer
APU or battery HVACCapitalDepends on idle hours and diesel price

If you pull company or drop trailers, trailer aero is the carrier's decision, not yours; focus on the tractor and your own habits. If you own the trailer and run highway miles, the SmartWay trailer tiers above are the guide.

How to tell whether a change worked

Fuel economy bounces around with weight, weather and terrain, so one tank proves nothing. To judge a change:

  1. Get a baseline. Total miles ÷ total gallons over at least a month, ideally on similar lanes. Your ELD or ECM can also report fuel used and idle fuel separately.
  2. Change one thing at a time. Slow the cruise speed first, measure a month, then add the next step.
  3. Compare like with like. Similar loads, similar lanes, the same season. Winter months usually run worse; compare January with last January, not with July.
  4. Count idle fuel apart from driving fuel. If your ELD splits them, you can see whether the mpg gain came from the road or from less idling.
  5. Write it down. A simple monthly line of miles, gallons and mpg is enough. The same records feed your IFTA return; see the IFTA mileage and fuel log.

Driver habits your ELD can show you

Most ELDs and telematics systems report the habits that cost fuel. The ones worth reading every week:

  • Idle percentage of engine hours, and idle fuel in gallons.
  • Time above your target speed, for example share of highway time above 65 mph.
  • Hard braking and hard acceleration events, which mean fuel spent and then thrown away as heat.
  • Cruise control use on open highway.
  • Top gear percentage, where the engine is turning slowest.

For an owner-operator these are your own habits; for a small fleet they are a coaching tool. Either way, a habit that improves shows up in the next month's fuel bill.

What one mpg is worth

ONE TRUCK · 110,000 MILES A YEAR

EXAMPLE

At 6.5 mpg16,923 gal
At 7.0 mpg15,714 gal
Gallons saved1,209
× EIA diesel $6.276$7,588

Made-up truck and miles; only the diesel price is real (EIA weekly U.S. average).

Half an mpg is worth more than most fuel card discounts, and it adds to them. For what the national average is and how to measure your own, see semi truck mpg. For new trucks, see what makers claim for the most fuel efficient semi truck. Fuel savings also flow straight to your profit: see is a trucking business profitable, and if cash for an APU or aero kit is the problem, truck factoring explains getting paid sooner on loads you already hauled.

Box trucks and hotshots

The same rules apply, scaled down. A 26 ft box truck has a tall flat front and gains most from speed and roof deflectors; see box truck dispatch. A hotshot pickup pulling a gooseneck gains from lower speed, correct tire pressure on truck and trailer, and not hauling empty weight. Measure both the same way as a semi: a month of miles divided by a month of gallons, before and after each change.

Sources

Better fuel economy lowers your floor. Our truck dispatch service books loads above it, with every rate confirmation sent to you to approve.

How to improve fuel economy in a truck: questions carriers ask

What is the fastest way to improve fuel economy in a semi truck?

Slow down. EPA's SmartWay program puts it at about 0.1 mpg for every 1 mph, and says cutting highway speed by 5 mph reduces fuel use by about 7%. It costs nothing and works on the next load.

How much do trailer skirts save?

EPA verifies trailer aerodynamic devices in tiers of 1%, 4%, 5% and 9% or more fuel savings over a traditional trailer. A SmartWay-designated trailer reaches 6% or more, with at least 5% from verified aero devices and 1% or more from verified low rolling resistance tires. Savings are measured at highway speed.

Does idling really hurt fuel economy?

Idling burns about 0.8 gallons an hour with zero miles, according to a DOE fact sheet, and a long-haul truck can idle about 1,800 hours a year for rest periods alone. That fuel counts in your total gallons, so it lowers your mpg and raises the fleet mpg question on your IFTA return.

Do fuel additives improve diesel mileage?

We haven't found independent, published test results we could cite for specific additives, so we don't recommend any. Use the fuel grade and additives your engine maker specifies, and judge any product by your own before-and-after fuel logs over several tanks.

How much does better fuel economy save a year?

At 110,000 miles a year, going from 6.5 to 7.0 mpg saves about 1,209 gallons. Multiply by your diesel price: at $5 a gallon that is about $6,000 a year, more than most fuel card discounts.

Written by

Richard Bailey is a truck dispatcher with 8 years of experience in trucking. A dispatcher's day is rate cons, broker calls and the cost-per-mile math behind every load, and that is the work these guides come from. He writes and checks the money guides, calculators and term pages on this site.

Updated October 2026. Every rate and date on this page has its source and the date we checked it. How we research

Burn less, and haul for more

Our dispatchers book loads with fuel in the math: fewer empty miles, the surcharge on every rate con, and lanes that pass cheaper diesel. Every load is offered to you first, and you confirm it.

No setup fee. No contract. You confirm every load.

Drag to tear, or just tap the button.

Book loads that pay the math